There is one game that has made landmarks in the gaming industry regarding its popularity, and that is Pokemon Go. It is a real-time game, and people love to play long hours. An exciting game on a crucial stage gets stopped due to the error message “Pokemon Go GPS signal not found”, which creates a lot of disappointment & anxiety.
Pokemon Go is a highly engaging game and with increasing intensity in your mind to reach the next level, appeals you to play it quite often. It uses augmented reality technology to generate real-time information about the surrounding with the help of GPS signals and integrate the virtual world with the real world. The game fails to work if your device is unable to incorporate it with the GPS. Error messages “Pokemon Go GPS signal not found 11” usually hinder the gameplay when the signal gets interrupted due to some technical faults develop in the iOS.
As a Pokemon player, you all must be aware that to play this game, you would have to move around in your area to find more Pokemon, which is only possible with a strong GPS signal. “Pokemon Go GPS not found” error occurs during the game because of low signal response or weak GPS hardware. Older versions of androids or economical mobile phones may not have robust built-in GPS.
However, there can be some sudden technical halts in the android system that cause the Pokemon Go GPS not found issue, while playing.
A sudden interruption in the middle of the stage becomes unbearable, and all you wish to find out is a quick resolution to the problem. You can apply a few direct methods on your device to rectify the Pokemon Go GPS signal not found hitch, which may or may not clear the problem temporarily. You can prefer to rely on professional iOS software that can detect the issue fast and repair the fault forever so that you do not have to go through the same disturbance over and over again. The best possible method is to use iMYFone Fixppo professional tool to fix the Pokemon Go GPS signal not found fault. Go through the article below to find out how easy it is to use.
The easiest method you can apply to get over any technical issue, including Pokemon Go GPS signal not found, that occurs in your iPhone, is integrating it with iOS System Recovery.
iOS System Recovery is a professional third party software but works as good as the factory solution. You will not have to waste your time in understanding the typical methodologies involved in rescuing the iPhone. It has a user-friendly console and takes much less time to resolve specific issues on your iPhone, like the Pokemon Go GPS signal not found.
To enjoy the perfect mood of playing Pokemon Go without any hindrances that take place on your mobile, download the iMYFone Fixppo tool on a PC or Laptop and install it. That is it; now, if any technical faults, including “Pokemon Go GPS signal not found 11” errors, that disturb the smoothness of the iOS functioning or gaming fun, you need to connect your iPhone to this software and follow few simple steps on the panel. Apart from this, you do not have to worry about backing up the data on your iPhone as iMYFone Fixppo assures to fix Pokemon Go GPS not found the problem without any data loss.Free DownloadFree Download
Follow the steps below to remove Pokemon Go GPS not found error, using the iOS System Recovery tool.
Step 1. Click the iMYFone icon on the desktop screen of your laptop, to launch the software and connect the Apple iPhone to the computer system.
Step 2. Now click on the “Standard Mode” option on the top left to go to the next page and let the software detect your iPhone model.
Step 3. If the model is not detected automatically, you can enter the DFU mode on your mobile by following the steps on the panel.
Step 4. After clicking the “Start” button on the screen press & hold the “Power” & “Home” button together.
Step 5. Now release the “Power” button and stay on the “Home” button till the iPhone enters the DFU mode.
Step 6. The software panel shows the iPhone model number and compatible firmware. Release the “Home” button and click the “Download” button to download the firmware on your iPhone.
Step 7. As the firmware download completes, the software panel shows the “Start to Fix” button on a new page of the board. Click on the button to fix the “Pokemon Go GPS signal not found 11” complications, disturbing your gameplay.
The iPhone will restart after the process finishes, and iOS System Recovery has quickly repaired all the issues that create GPS not found signal on Pokemon Go. Now you can disconnect your mobile and have fun in your favorite game.
There are times when you cannot use iMYFone Fixppo to fix the Pokemon Go GPS signal not found, problem on your mobile. If you are somewhere out of your home, workplace, or on vacation, when your laptop is not available at your hand, then, in that case, you can apply few other tricks that might, as a matter of chance, hit the right place at the right time. You can follow the below methods and check if they work positively to rectify the error message.
Since the error message “Pokemon Go GPS signal not found 11” itself explains that there is a problem with the GPS (Global Positioning System). It implies that the error is related to the system settings that give the Location of the mobile. Re-switching the location service may correct the issue. Follow the steps to Turn On/Off the location service.
Step 1. Click on the Settings menu on your device to enter the “Privacy” section given down the list.
Step 2. In the Privacy section, find “Location Service” and click on it.
Step 3. In this section, drag left the green switch to turn off the Location.
Step 4. Now drag right the same switch to Turn On the Location.
[Alt: Turn On The Location Services to fix Pokemon Go Gps not found]
Check the game Pokemon Go, if it runs smooth.
“Leave it as it is” is a universal solution to any problem in the world. And the same trick can be applied here too. Here the idea is to check if the Pokemon Go GPS signal not found error has taken place due to some temporary issues that occurred in the signaling system. The cause of hindrance in the GPS signals can be a magnetic field on a particular spot or moistures weather, which lowers the detection strength of the device.
Leave the game in the same state for some time may help it recover the issue on its own & reactivating the game once again. For this, you only need to press the “Home” button, which will minimize the game in the background. You can keep using the mobile if you want to use any other application. After some time, open the game again to check if it started detecting the signal or if it still shows the message “Pokemon Go GPS not found”.
Leaving the problem for some time may not improve the situation as sometimes these glitches get stick to screen or stop the GPS detection service. Instead of keep waiting to get it rectified on its own, you can try quitting the game forcibly and then relaunching it later.
If you do not know how to force quit the Pokemon Go app, then follow the steps below.
Step 1. Hit the “Home” button two times to open the multitasking screen.
Step 2. You can see the Pokemon Go app in front of the app list.
Step 3. Drag the app upwards to quit the app.
Step 4. Now relaunch the Pokemon Go from the app icon.
Quitting and relaunching the app may turn out to be fruitful and remove the error of signal not found on Pokemon Go. If not, you can try out one more trick, given below.
The methods like Force quit or Location turn off might only help you if the error is due to a sudden pause in the GPS signal but not a more significant technical fault. But it does happen that even after quitting and relaunching the app, the game comes up with the same error message “Pokemon Go GPS signal not found 11”. It is very frustrating that even the cost of losing the current game progress data, professional success is not achieved. In that case, you can try and reset the complete network setting. It is not a guaranteed solution but has a higher chance of success in case of GPS signal not found issues.
To learn how to Reset the Network Setting on iPhone, go through the steps below.
Step 1. In the “Settings” menu on your iPhone, find and enter the “General” section.
Step 2. Go down a few options below to find the “Reset” section.
Step 3. Here among other options, hit the “Reset Network Settings ” option and confirm your selection.
The above will Reset the Network Setting, refreshing the networks from any bugs and hindrances. After this, you can click on the Pokemon Go icon to launch the game and check if the Pokemon Go GPS signal not found has rectified or not.
Pokemon Go is a game that connects the player to the real world using location tracking and mapping technology or known as GPS. If this GPS gets mal-functioned, the games like Pokemon Go cannot perform correctly. Numerous reasons generate errors like the Pokemon Go GPS signal not found. Sometimes other applications running in the background disturb the whole scenario, but a common man cannot see them. The game stops and denies catching the signal like a system hangs-out, instigating you with Pokemon Go GPS signal not found.
At times few tricks and tips work fine to recover the iOS glitch and removing the GPS signal not found in the Pokemon Go problem temporarily. But sooner or later, the game re-develops the same issue, and you find yourself in frustration of losing the game level progress once again. In a way, it is time and energy wastage. A better and reliable solution is to remove the “Pokemon Go GPS not found” using iOS System Recovery. This professional tool not only repairs the technical faults that are disturbing the game application, but at the same time, it also refreshes and updates the iOS firmware, and lets you have the Pokemon Go experience similar to playing on a new mobile.Free DownloadFree Download