I have seen people getting irritated with their iPhone stuck on searching all of a sudden while they were on a call or trying to connect data. It can even happen in the middle of the town in the radius of high range networks. People do weird things like try raising the cell-phone high above to make it catch the signal or pat it a bit, but nothing seems to change anything. If you have also faced the same situation recently & worrying, “why does my iPhone keep saying searching,” then here is the place where you are going to find the answer to all your queries.
iPhones are popular mobile devices that are among the topmost well-established brands worldwide. It is not just unexpected to experience a network issue in an Apple mobile but also tricky to understand the reason behind the iPhone stuck on searching. What comes to our mind is temporary network trouble caused due to the unavailability of the signal in a particular region. This notion certainly does not work all the time as the problem is never-ending no matter you change the point of location or move to another area. Passing out long hours with it and even looking at it the next day, the iPhone keeps saying “searching.”
Before getting to the methods to fix your iPhone keeps saying searching mode, we first need to understand the possible reason why the iPhone keeps searching the signal in the middle of resourceful networks.
The primary function of the mobile phone runs on cellular networks, although we have an alternate of WI-FI. A known Wi-Fi connection is helpful for internet activities, but they definitely cannot replace the cellular networks on the mobile. Most of us come across the situation when surfing on the internet, chatting on social media, or while connecting a call; everything seems to crash in the middle of the job. Stable WI-Fi may temporarily avail you with your work but leaves a question in your mind, “why does my iPhone keep saying searching.” It is difficult to understand why it happens when everything from network range to the iPhone device, looks perfect.
There are many specific reasons for the iPhone stuck on searching; some of them classified below:
Whenever your iPhone keeps searching for signal continuously, then instead of panicking over it, you can wait for some time and see if it recovers itself. You are lucky if it does, but if it persists, the problem can be with the hardware, software, or system settings. If you are well aware of the internal damage of the device, you should instantly visit the Apple store.
If you are a bit unsure of any defect in the built-in antenna or any other parts, then try a few tricks that are given below before looking for the service center. Apart from hardware issues, you can always prefer to use the iOS System Recovery software to recover iPhone stuck on searching mode, precise method of which is given below in the list. But first, begin with some tips and apply them over your iPhone.
It can happen to you that your iPhone keeps searching for the network while you are on the move. A sudden change in the coverage area of the carrier can hamper the connection. Sometimes while in the range of heavy electronic equipment, the network coverage gets distracted, and the iPhone keeps saying searching until you change your place.
Just to be sure about the network available to your device, try and reselect the cellular data network manually with few steps.
Step 1. In the “Settings” menu, click on the “Cellular” section.
Step 2. Here, down below you will find the “Cellular Data Network” option; click on it.
Step 3. In this section, you can check and edit the APN setting from the APN option. It will help you reselect the network available in your immediate coverage area.
If you are unable to select the mobile network and the iPhone still says “searching,” then try moving to some other place, or if you are already traveling, then wait till the particular area changes. If you are in a location with intense electronic machines that create a magnetic field, then it is better to make some distance from them and see if the iPhone regains the signal.
Sim cards are an essential part of any GSM mobile device. A corrupt Sim card or an improper insertion in the slot will put the iPhone stuck on searching condition. You might have got your device bashed somewhere unknowingly, which has displaced the Sim card from its place. A slightly shorter or longer Sim will easily face this situation. It is just a way to make sure that the searching position on the iPhone is not because of any hardware condition.
Removing or inserting the Sim card on the iPhone is quite easy. Switch OFF your device first and then tuck-in the blunt pin, provided with your iPhone, into the small hole on the side of the phone. A smooth pressure with the pin will push-out the Sim slot above it. Pull the slot out of the cabinet and check the Sim card. Now put the Sim properly into the given space and re-insert then slot back to the iPhone.
Turn ON your iPhone from the Power button and wait for few minutes to check if the iPhone stuck on searching problems rectified.
Many mobile users have a habit of keeping too many applications installed on their devices. Apps running in the background at times conflict with the iOS due to improper compatibility with the version or overloading. There is a chance that some apps which have access to the network data may interrupt the signal strength causing the iPhone stuck on searching.
Rebooting the iPhone is an easy and quick process that has a strong possibility of fixing standard errors that are disturbing the iPhone working. Reboot the iPhone following the given process.
Step 1. Long press the Volume Up button for 8-10 seconds and then release it. Now repeat the same process with the Volume Down button.
Step 2. After the above step, press & hold the Power button till the Apple logo appears on the screen.
Step 3. The iPhone will restart in a few minutes automatically.
After the iOS loads completely, check if the problem fixes or you still stand with the same old question “why does my iPhone keeps saying searching.”
Carrier settings updates are usually pushed by the cellular network providers or during the Apple update. If they are not downloaded & installed timely on to the iPhone, it can always trouble your device. The system automatically connects the carrier updates.
But people frequently miss downloading the updates if never allowed to connect their mobile to the internet for a long time. An older version of Carrier Setting may result in your iPhone stuck on searching signal and will stay the same way till you update your carrier settings.
So just in case you have missed out on some updates for the carrier settings, check it out through the following steps and download if any update files are available.
Step 1. Get into a stable WI-Fi network and connect your iPhone to it, before doing anything with the carrier settings.
Step 2. Click on the “Settings” menu and enter the “General” section.
Step 3. No click on the “About” option, given on the top, and check if any updates are available in the “Carrier” section.
A pop-up window will show if any updates are available, in a few seconds. Click on the “Download and Update” button on the window, it appears. After the updates installed, you have to restart your device following the steps given above.
Wait for sometime after the restart and check if the iPhone showing network or still your iPhone keeps searching signal.
A simple trick checking the cellular section on mobile works in few cases of iPhone stuck on searching. While traveling over a long distance, the change of region may require turning ON the cellular data or data roaming manually. It is one of the fundamental reasons why the iPhone keeps saying searching until the settings change while you are traveling intercity.
Try to check the cellular settings of your iPhone with the following steps.
Step 1. Go to the “Settings” menu, and from the list of options, click on the “Cellular” option.
Step 2. Now switch ON the “Cellular Data Settings” or “OFF” it and then ON it once again.
Step 3. While traveling, you should put ON the “Data Roaming” option.
Step 4. You can find & Switch ON the Data Roaming option in the Cellular section of the Settings Menu.
There is a small chance of rectifying your problem with this method, but hopefully, you get through it.
The Airplane Mode is one such settings option provided in the smartphones that can directly interrupt the cellular networks if turned on. That means, with the help of the Airplane Mode, the Network Settings can, in a way, restarted or refreshed. This method does not assure the recovery of the signal but still works in 10% of cases of iPhone stuck on searching.
If you do not know how to enable/disable Airplane Mode, then on the Home screen, drag up your finger to get the notification bar and click on the icon with an airplane on it. It will enable Airplane Mode. To disable it once again, repeat the same process.
You can also find the Airplane Mode section in the Settings Menu. Here you have to drag left the green switch to turn it OFF. Drag right the switch to turn ON the Airplane Mode.
The Network Settings play a significant role in connecting the mobile device to the networks of the vendors. An unknown or an unintended change in the Network Settings can probably be one of the reasons why the iPhone keeps saying searching. You do not have to worry about how and when it has changed. It can be due to some error in the software.
Resetting the Network Settings can trouble you in some other ways, too, as it keeps all the data regarding the cellular and Wi-Fi networks like passwords and other credentials. Once reset, it will put the iPhone network to factory settings, and you will have to redo everything once again. So it is recommended to backup the network data somewhere.
To learn how to reset the Network Settings, read the steps below.
Step 1. Go to the “Settings” menu and click on the “General” section.
Step 2. In the General section, find the “Reset” option and click on it, where the “Reset Network Settings” option lists.
Step 3. Click on the Reset Network Settings option and verify it.
After the reset completes, check your device once again if it still shows “searching,” or the signal tower appears.
A temporary error that is hampering the iPhone to stuck on searching mode gets fixed by applying some local methods as above. But if you come out unsuccessful after using the above tricks on your iPhone, then there is a high chance of your device having some major issue with the iOS system. The best way to get rid of such problems instead of getting frustrated is to use the iOS System Recovery tool.
If the iPhone keeps searching the signal even after applying the local methods over it, then the problem seems to be much more severe. Recommendations are to get your iPhone scanned by some authentic system. iOS System Recovery is a professional third party software that can recover to network in a few minutes.
iOS System Recovery is software that only concerns the iOS devices, and it specializes in repairing regular to major technical faults that are interrupting the smooth processing of the invention. It is capable enough to resolve the issue of the iPhone stuck on searching problem in very less time, with a guarantee of no data loss.Free DownloadFree Download
Getting frustrated with the iPhone searching issue and want to learn the processing of iOS System Recovery, then simply download and install the software and follow the guide below to fix your iPhone stuck on searching with it.
Step 1. Hit the iOS System Recovery icon given on the desktop and launch the software.
Step 2. Link your iPhone to the PC using the cable and click on the “Standard Mode.”
Step 3. Wait for a few seconds to let the software detect the iPhone model automatically.
Step 4. If the iOS System Recovery is unable to find your device, do it manually by moving your device to DFU mode.
Step 5. For DFU mode, click the “Start” link on the screen and then keep pressing the “Power” & “Home” button for 10 seconds approximately.
Step 6. Release the Power button and wait till the iPhone enters the DFU mode.
Step 7. After the software panel changes to the next page, release the Home button.
Step 8. Verify the iPhone model and download the given firmware on your device by clicking the “Download” button on the software panel.
Step 9. When the download completes, hit the “Start to Fix” button, which will initiate the process to fix your iPhone stuck on searching.
The iPhone restarts after the process ends and will refresh your device to its original smooth running condition. No more searching on the signal bar, and you can enjoy the ultimate freedom of connecting with your friends and family members.
Facing technical issues on the mobile phone is quite common by the users, which makes them a little anxious. Especially if the case is with the iPhone, people get much more worried than what is needed. To fix the iPhone stuck on searching, the users start by randomly clicking a few buttons or instantly run towards the service center. It not just increases the irritation level but also wastes a lot of time and money.
A hardware repair indeed requires a hand in the authorized center, but other than that, some normal to significant software errors can be resolved by self-initiating a few methods. If the local tricks applying on the device do not work in favor, you can go ahead with the most reliable iOS System Recovery tool to repair the iPhone stuck on searching. With this tool, you can work on your iPhone by yourself and get the outcome similar to an authorized service center.Free DownloadFree Download