Everyone knows how tricky it is if your iPhone is stuck in boot loop after iOS 12 Beta Update. With the lack of technical know-how, you may end up getting confused and packing your precious iPhone. However, the quick-fix is just within your reach. The best way to approach this problem is to understand why iPhone might get stuck in boot loop.
It is definitely a disgusting experience when your iPhone get stuck in boot loop. However, it is fundamental to get the root cause before fixing to avoid the possibility of reoccurrence.
The common cause is normally a bad update caused by either incomplete program update or device malfunction before or even after complete update. Jail breaking is another thorn that adds up to the list as it increases the chance of attack by malicious programs. You can avoid this by downloading programs from reliable sources.
Another cause could also be in the case of malfunctioned drivers or just bad hardware anywhere in the device. Nevertheless, this should not send waves of fear down your nerves as there are a host of reliable solutions.
This method is a simple fix for iPhone stuck in boot loop. However, you need to be quite careful as it is a risky process. Ensure you have an expert to supervise this process. The tools needed are two screwdrivers, a plastic pull tool, and a suction cup. Before starting your iPhone, press the combination of Home and Sleep button until the Apple logo disappear.
Step 1. Get out the two screws situated on the left and right side of the charging port.
Step 2. Carefully, place the suction cup on the screen of your iPhone device and then lift the screen a little it.
Step 3. Again, get out the two screws which locks the battery connector to the pocket.
Step 4. Pop the battery connector up and wait for some seconds before returning everything to the original state.
Step 5. Try restarting your iPhone and check whether the problem is fixed.
This is definitely one of the most popular plain sailing methods used to fix an iPhone stuck in boot loop. What is particularly impressive in this method is that no data nor settings are at a risk of being lost. As if that is not enough, the simplicity of forced restart and less time taken in restarting your iPhone makes it worth use.
For iPhone X/8/8 Plus
Step 1. In quick succession, press and release the volume up switch.
Step 2. Now press and release the volume down switch quickly.
Step 3. Finally, press and hold either the Side or Power Button to restart your iPhone. Sit back and wait for some seconds. Your phone should then turn on and display the lock screen. Your iPhone is now reset.
For iPhone 7/7 Plus
Step 1. First press and hold Sleep/awake button with Volume Down Button situated on the left side of your iPhone simultaneously for 10 seconds.
Step 2. Release the buttons when Apple logo is displayed. Wait for some few seconds for the iPhone to restart.
For iPhone 6/6s and earlier versions
Step 1. Press and hold the “Home” button on the iPhone stuck in boot loop mode.
Step 2. While keeping the “Home” button held, simply press and again hold the “Sleep” button.
Step 3. Continue holding the pair until the Apple logo appears on the screen. Now, wait for the iPhone to restart.
Step 1. Launch iTunes on your computer and connect your iPhone using a suitable media like a USB cable.
Step 2. After successful connection, iTunes would automatically detect your iPhone in the “Recovery Mode”.
Step 3. Hit the “Update” button if you want to preserve your data or “Restore” for the converse.
Step 4. Keep calm as the iTunes restore your iPhone. Once the process successfully completes, your iPhone stuck in reboot loop must now go back to its original state.
iOS system recovery is an excellent tool that quickly fix a host of iOS-related problems like being stuck on Apple logo, black screen, and white screen among others with absolutely no loss in data. The simplicity and support of a vast range of iPhone devices makes it an indispensable up to par tool for scores of users across the globe. With iOS system recovery, you can reinstall iOS firmware files in a few clicks. Isn’t that not great? Definitely, it is.
Step 1. Download and install iOS system recovery software in your computer. Now run the program and connect your iPhone device to this computer using a suitable connection media such as a USB cable. Upon successful connection, select “Standard Mode” from the modes provided on the main interface.
Step 2. Once the mode is selected, simply hit the “Start” button and get glued to the onscreen instructions in order to set your device in the DFU mode.
Step 3. iOS system recovery will automatically detect your iPhone device and let you get the ideal firmware. Just click the “Download” button and automatically obtain a matching firmware.
Step 4. When the respective firmware is successfully downloaded, just hit the “Start to Fix” button. Your problem should be fixed in a couple of minutes.
Factory reset of iPhone stuck in loop mood could be an elementary and straightforward approach. However, one needs to have it in the fingertips that all content, data as well as settings will definitely get lost. But this being one of the most effective ways of fixing an iPhone stuck in loop mode, it is crucial to create a backup of your iPhone content before pulling this fix trigger. Once the backup is ensured, you now have total freedom to factory reset your stuck iPhone.
Step 1. Navigate to the “Settings” tab on your iPhone and select the “General” option.
Step 2. Under the options, choose “Reset” then “Erase all Content and Settings”.
Step 3. Finally, hit the “Erase iPhone” option and wait for iPhone factory reset.
When the iPhone has been reset, you will have to set it up again then verify whether the problem of reboot loop is fixed.